Syncon AW Hydraulic Fluid is available in two viscosity grades: ISO 22 and 32. It is formulated with synthetic polyalphaolefin (PAO) base oils, an effective antiwear additive and rust and oxidation inhibitors. It provides excellent wear protection for hydraulic pumps and motors, has outstanding oxidation resistance and thermal stability to help minimize deposit formation and provide long service life, and protects against rust and corrosion. It also has excellent demulsibility in the presence of water and good foam resistance.
Syncon AW Hydraulic Fluid exceeds the performance requirements of the leading hydraulic pump manufacturers, including Bosch Rexroth, Cincinnati Lamb, Oilgear, Parker Hannifin HPD (formerly Denison Hydraulics), Racine, Sundstrand, Vickers (Eaton) and Voith. It has a high dielectric strength for use as insulating oil in cherry pickers and electrical service repair trucks.
Note: In order to maintain its high dielectric strength, the oil must be kept clean and dry. Contamination with even a small amount of water will decrease the dielectric strength.
Specifications
ISO Grade |
N/A 22 |
Density @ 15.6 ºC (60 ºF) |
N/A 0.821 g/cm³6.84 lbs/gal |
Color1 | N/A 0.5 |
Flash Point (COC) |
N/A 218 ºC424 ºF |
Pour Point |
N/A -66 ºC-87 ºF |
Viscosity @ 40ºC |
N/A 22.0 cSt |
Viscosity @ 100ºC |
N/A 4.6 cSt |
Viscosity @ 100ºF |
N/A 115 SUS |
Viscosity @ 210ºF |
N/A 42 SUS |
Viscosity Index |
N/A 130 |
Acid Number2 | N/A 0.17 mg KOH/g |
Copper Corrosion3 | N/A 1a |
Dielectric Strength4 | N/A 35 kV |
Foam Test Seq I, II, III5 | N/A 0-0 mL |
FZG Gear Test, Pass Load Stage6 | N/A 10 |
Oxidation Stability, RPVOT7 | N/A 2400 min |
Rust Test8 | N/A Pass |
Applications
N/A
|
Features/Benefits
N/A
|
- 1 ASTM D-1500
- 2 ASTM D-974
- 3 ASTM D-130
-
4 ASTM D-877
At the point of manufacture - 5 ASTM D-892
- 6 ASTM D-5182
- 7 ASTM D-2272
- 8 ASTM D-665 A&B