Lubricant Specialists since1985
Syndustrial Rotary Compressor Oil is a premium quality synthetic lubricant developed for use in oil-flooded rotary screw, rotary lobe and rotary vane air compressors. It is particularly recommended for use in applications where operating conditions are unfavorable or too severe for conventional mineral oil-based compressor oils.

Syndustrial Rotary Compressor Oil is available in two intermediate viscosity grades: ISO 32/46 and 46/68. It is formulated with a blend of synthetic polyalkylene glycol (PAG) and synthetic ester base oils and carefully selected additives. It has outstanding oxidation resistance and thermal stability at high temperatures to help minimize deposit formation and provide long service life. It has high film strength to protect against wear, and also protects against rust and corrosion.

Syndustrial Rotary Compressor Oil is formulated to outperform conventional paraffinic or naphthenic compressor oils in oxidation resistance and deposit control. It has better thermal stability at high temperatures to minimize the buildup of sludge and varnish. It also has lower volatility for lower oil consumption. These benefits result in longer service intervals and less maintenance than with petroleum oils.

Note: Syndustrial Rotary Compressor Oil is not compatible with petroleum compressor oils. Care should be taken to avoid mixing the two products. When switching over from mineral oil to Syndustrial Rotary Compressor Oil, a complete flush, drain and refill should be performed.
Unit of Measure

Specifications

ISO Grade

N/A 32/46

Density @ 15.6 ºC (60 ºF)

N/A 0.964 g/cm³8.03 lbs/gal
Color1 N/A 0.5

Flash Point (COC)

N/A 251 ºC484 ºF

Pour Point

N/A -57 ºC-71 ºF

Viscosity @ 40ºC

N/A 35.9 cSt

Viscosity @ 100ºC

N/A 7.3 cSt

Viscosity @ 100ºF

N/A 182 SUS

Viscosity @ 210ºF

N/A 51 SUS

Viscosity Index

N/A 158
Acid Number2 N/A 0.17 mg KOH/g
Copper Corrosion3 N/A 1a
Foam Test4 N/A Pass
Four-Ball Wear Scar Diameter5 N/A 0.53 mm
Oxidation Stability, RPVOT6 N/A 1830 min
Rust Test7 N/A Pass

Applications

N/A

  • Oil-flooded rotary screw, rotary lobe and rotary vane air compressors where the manufacturer specifies a synthetic coolant or polyglycol/ester lubricant
  • Drop-in replacement for private-label polyglycol-based compressor oils marketed by Sullair and Ingersoll-Rand

Features/Benefits

N/A

  • Outstanding oxidation resistance and thermal stability at high temperatures.
  • High viscosity index and very low pour point for use over a wide temperature range.
  • Excellent cooling and heat transfer properties.
  • Excellent deposit control.
  • High film strength for wear protection.
  • Low volatility for lower oil consumption and less makeup oil.
  • Protects against rust and corrosion.
  • Extended service intervals compared to conventional mineral oil-based lubricants.
  • Compatible with commonly used seals, gaskets and hoses.
    Note: Syndustrial Rotary Compressor Oil is compatible with neoprene, silicone rubber, torlon, vespal and viton, as well as epoxy paints. It is not compatible with oil-based paints or with solvents, such as diesel fuel, kerosene, heptane, methanol, ethylene glycol or triethanolamine.

Health and Safety Information

N/A For recommendations on safe handling and use of this product, please refer to the Material Safety Data Sheet via http://w3.conocophillips.com/NetMSDS.

Ordering Information

Package Type

N/A 55G RD

Pricing Information

N/A Price/Gal

Shipping Note

N/A Shipping will be quoted upon receipt of your order.

  • 1 ASTM D-1500
  • 2 ASTM D-974
  • 3 ASTM D-130
  • 4 ASTM D-892
  • 5 ASTM D-4172
  • 6 ASTM D-2272
  • 7 ASTM D-665 A&B