Lubricant Specialists since1985
Syndustrial Gas Compressor Oil is a premium quality, synthetic blend lubricant developed for use as a crankcase oil and for cylinder lubrication in reciprocating compressors in natural gas service. It is specially formulated to minimize the effects of gas dilution and oil absorption in this type of service.

Syndustrial Gas Compressor Oil is available in one viscosity grade: ISO 150. It is formulated with a carefully balanced blend of synthetic ester and hydrotreated paraffinic base oils and select additives to provide excellent service and protection over a wide temperature range. It has excellent oxidation resistance and thermal stability at high temperatures to help minimize deposit formation, and has a high viscosity index and good low-temperature properties for year-round use. It protects against rust and corrosion, and contains a special inhibitor to resist corrosion caused by hydrogen sulfide in sour gas. The synthetic blend formulation provides enhanced oxidation resistance and lower volatility at high temperatures compared to conventional mineral oils, which can result in extended service intervals, lower oil consumption and reduced maintenance.

Syndustrial Gas Compressor Oil is formulated to minimize the effects of gas dilution and oil absorption typically encountered in natural gas service. The use of synthetic ester base fluid helps reduce the solubility of hydrocarbon gases in the oil. In combination with high starting viscosity, this minimizes viscosity loss due to gas dilution, which can cause cylinder scoring and high wear rates. Similarly, there is less absorption of oil into the gas stream, which helps reduce oil consumption and lubricant carryover, and helps prevent loss of the protective oil film from the cylinder walls.
Unit of Measure

Specifications

ISO Grade

N/A 150

Density @ 15.6 ºC (60 ºF)

N/A 0.875 g/cm³7.29 lbs/gal
Color1 N/A L 0.5

Flash Point (COC)

N/A 227 ºC441 ºF

Pour Point

N/A -33 ºC-27 ºF

Viscosity @ 40ºC

N/A 150 cSt

Viscosity @ 100ºC

N/A 18.6 cSt

Viscosity @ 100ºF

N/A 775 SUS

Viscosity @ 210ºF

N/A 95 SUS

Viscosity Index

N/A 140
Acid Number2 N/A 0.22 mg KOH/g
Copper Corrosion3 N/A 1a
Demulsibility, Minutes to Pass4 N/A 15
Foam Test5 N/A Pass
Four-Ball Wear Scar Diameter6 N/A 0.50 mm
Oxidation Stability, RPVOT7 N/A 1100 min
Rust Test8 N/A Pass

Applications

N/A

  • Industrial reciprocating compressors pumping natural gas
  • Reciprocating compressors commonly found in remote gas gathering stations
Syndustrial Gas Compressor Oil can be used in applications where Frick No. 12 synthetic gas compressor oil is recommended.

Features/Benefits

N/A

  • Excellent oxidation resistance and thermal stability at high temperatures
  • High viscosity index and low pour point for use over a wide temperature range
  • Formulated to minimize the effects of gas dilution and oil absorption
  • Low varnish-forming tendency
  • Resists hydrogen sulfide corrosion
  • Protects against rust and corrosion

Health and Safety Information

N/A For recommendations on safe handling and use of this product, please refer to the Material Safety Data Sheet via http://w3.conocophillips.com/NetMSDS.

Ordering Information

Package Type

N/A 55G RD

Pricing Information

N/A Price/Gal

Shipping Note

N/A Shipping will be quoted upon receipt of your order.

  • 1 ASTM D-1500
  • 2 ASTM D-974
  • 3 ASTM D-130
  • 4 ASTM D-1401
  • 5 ASTM D-892
  • 6 ASTM D-4172
  • 7 ASTM D-2272
  • 8 ASTM D-665 A&B