Lubricant Specialists since1985
Syncon AW Hydraulic Fluid is a premium quality, synthetic antiwear hydraulic fluid developed for use in a wide variety of industrial and mobile hydraulic systems operating at high pressure and under extreme-temperature conditions. It is particularly recommended for use in applications where operating conditions may be unfavorable or too severe for conventional mineral oil-based hydraulic oils.

Syncon AW Hydraulic Fluid is available in two viscosity grades: ISO 22 and 32. It is formulated with synthetic polyalphaolefin (PAO) base oils, an effective antiwear additive and rust and oxidation inhibitors. It provides excellent wear protection for hydraulic pumps and motors, has outstanding oxidation resistance and thermal stability to help minimize deposit formation and provide long service life, and protects against rust and corrosion. It also has excellent demulsibility in the presence of water and good foam resistance.

Syncon AW Hydraulic Fluid exceeds the performance requirements of the leading hydraulic pump manufacturers, including Bosch Rexroth, Cincinnati Lamb, Oilgear, Parker Hannifin HPD (formerly Denison Hydraulics), Racine, Sundstrand, Vickers (Eaton) and Voith. It has a high dielectric strength for use as insulating oil in cherry pickers and electrical service repair trucks.
Note: In order to maintain its high dielectric strength, the oil must be kept clean and dry. Contamination with even a small amount of water will decrease the dielectric strength.
Unit of Measure

Specifications

ISO Grade

N/A 22

Density @ 15.6 ºC (60 ºF)

N/A 0.821 g/cm³6.84 lbs/gal
Color1 N/A 0.5

Flash Point (COC)

N/A 218 ºC424 ºF

Pour Point

N/A -66 ºC-87 ºF

Viscosity @ 40ºC

N/A 22.0 cSt

Viscosity @ 100ºC

N/A 4.6 cSt

Viscosity @ 100ºF

N/A 115 SUS

Viscosity @ 210ºF

N/A 42 SUS

Viscosity Index

N/A 130
Acid Number2 N/A 0.17 mg KOH/g
Copper Corrosion3 N/A 1a
Dielectric Strength4 N/A 35 kV
Foam Test Seq I, II, III5 N/A 0-0 mL
FZG Gear Test, Pass Load Stage6 N/A 10
Oxidation Stability, RPVOT7 N/A 2400 min
Rust Test8 N/A Pass

Applications

N/A

  • Hydraulic systems operating under extreme-temperature conditions
  • Automated machine tools
  • Chain drives
  • Plain and rolling-element bearings used in electric motors
  • Hydraulic systems on mobile equipment such as dump trucks, motor graders, bulldozers and forklifts
  • Hydraulic presses, shears, jacks and punches in machine shops
  • Service station lifts
  • Electrical service repair trucks
Syncon® AW Hydraulic Fluid meets the performance requirements of:
  • Bucyrus-Erie blast hole drills
  • Cincinnati Lamb Specifications P-45 (ISO VG 22) and P-68 (ISO VG 32)
  • DIN 51524 Part 2, Antiwear Hydraulic Oils, Type HLP
  • ISO 11158:1997, Hydraulic Fluids, Family H
  • U.S. Steel 127

Features/Benefits

N/A

  • Outstanding oxidation resistance and thermal stability at high temperatures
  • Outstanding pumpability at low temperatures
  • Protects against wear
  • Protects against rust and corrosion
  • Separates rapidly from water
  • Compatible with conventional mineral oils and commonly used seals

Health and Safety Information

N/A For recommendations on safe handling and use of this product, please refer to the Material Safety Data Sheet via http://w3.conocophillips.com/NetMSDS.

Ordering Information

Package Type

N/A 55G RD

Pricing Information

N/A Price/Gal

Shipping Note

N/A Shipping will be quoted upon receipt of your order.

  • 1 ASTM D-1500
  • 2 ASTM D-974
  • 3 ASTM D-130
  • 4 ASTM D-877
    At the point of manufacture
  • 5 ASTM D-892
  • 6 ASTM D-5182
  • 7 ASTM D-2272
  • 8 ASTM D-665 A&B