Lubricant Specialists since1985
Pure FM is a premium quality, food-grade, synthetic grease specially developed for use as a lubricant in applications where there is the possibility of incidental food contact. It is recommended for use in food processing, bottling and sanitary equipment operating at low or high temperatures.

Pure FM is manufactured with synthetic polyalphaolefin (PAO) base oil thickened with silica gel. It is compounded with special food-grade additives to provide oxidation resistance, rust and corrosion protection, and wear protection. It has excellent resistance to water washout and provides excellent rust and corrosion protection in applications where the equipment is exposed to fruit acids, chemicals or saline solutions.

Pure FM meets the requirements of U.S. FDA Regulation 21 CFR 178.3570 and former 1998 USDA H1 guidelines for incidental food contact. It is registered by NSF International as an H1 lubricant.
Unit of Measure

Specifications

NLGI Grade

N/A 2

Thickener

N/A Silica Gel

Color

N/A Clear with Yellow Cast

Dropping Point

N/A 340 ºC650 ºF

Density

N/A 7.30 lbs/gal
Penetration, Worked 60 Strokes1 N/A 280

Texture

N/A Smooth
Four-Ball EP Weld Load2 N/A 315 kgf
Four-Ball Wear Scar Diameter3 N/A 0.70 mm
Oxidation Stability, 100 Hours, Pressure Drop4 N/A 2.5 psi17.2 kPa
Rust Prevention5 N/A Pass
Water Washout Resistance, Weight Loss @175 ºF6 N/A 2.5 %

Base Oil Viscosity @ 40ºC

N/A 62.5 cSt

Base Oil Viscosity @ 100ºC

N/A 9.8 cSt

Base Oil Viscosity @ 100ºF

N/A 320 SUS

Base Oil Viscosity @ 210ºF

N/A 60 SUS

Viscosity Index

N/A 135

Usable Temperature Range

N/A -40 to 204 ºC-40 to 400 ºF

Applications

N/A

  • Machinery used in canneries, meat and poultry plants
  • Food processing equipment
  • Bottling plants
  • Seamers
  • Industrial applications requiring a transparent, nonstaining grease
  • Applications where water pollution laws prohibit lubricants from leaving an oil sheen on the surface of the water, such as dredging and immersed cables.
    Note: Surfaces coated with Pure FM will not leave an oil sheen when immersed in water, unlike conventional mineral-oil based greases.

Features/Benefits

N/A

  • Registered as H1 by NSF International
  • Synthetic, low-volatility base oil
  • Outstanding oxidation stability
  • Excellent resistance to water washout
  • Protects against rust and corrosion
  • Good wear protection
  • Nonstaining
  • Suitable for use over a wide range of operating temperatures

Health and Safety Information

N/A For recommendations on safe handling and use of this product, please refer to the Material Safety Data Sheet via http://w3.conocophillips.com/NetMSDS.

Ordering Information

Package Type

N/A 40/14 oz

Pricing Information

N/A Price/LB

Shipping Note

N/A 36 lb

  • 1 ASTM D-217
  • 2 ASTM D-2596
  • 3 ASTM D-2266
  • 4 ASTM D-942
  • 5 ASTM D-1743
  • 6 ASTM D-1264