Conoco Circulation Oil is a high-quality, rust-inhibited mineral oil specially developed for the lubrication of conveyor and crusher bearings in copper crushing mills.
Circulating Oil is available in one viscosity grade: ISO 150. It is formulated with high-quality paraffinic base oils and select additives to provide protection against rust and corrosion and resistance to foaming. It has excellent water-separating properties to minimize the formation of emulsions in circulating systems subject to contamination with large quantities of water, minerals, dirt and scale.
Conoco FC Fluid-D is a water-glycol based fire-resistant hydraulic fluid developed for use in hydraulic systems operating at 2000 to 3000 psi in areas subject to fire hazards. It can withstand intermittent pressure spikes up to 5000 psi. It contains sufficient water to snuff out a fire resulting from ignition of a fluid leak.
FC Fluid-D is formulated with 60% diethylene glycol and 40% water. It is fortified with additives that provide lubricity, wear protection and corrosion protection for extended life of hydraulic system components. It contains less than 60 parts per billion (ppb) phenols, and does not contain any nitrites or nitrosamines.
FC Fluid-D has good antiwear properties to ensure long life for hydraulic pumps and ...
Conoco FR Hydraulic Fluid is an invert-emulsion (water-in-oil) type fire-resistant hydraulic fluid developed for use in hydraulic systems operating at 2000 to 3000 psi in areas subject to fire hazards. It combines the benefits of an oil-based hydraulic fluid with the fire-resistant properties of water. It is approved by the MSHA for use in underground mining equipment.
FR Hydraulic Fluid is formulated with high-quality paraffinic base oils, 40% water and a special emulsifier than produces a stable, homogeneous invert emulsion. It is fortified with antiwear additives, rust and corrosion inhibitors, and a biocide. The outer oil film lubricates and protects hydraulic system components against rust, corrosion and wear. The inner water ...
(4) Conoco Hydroclear Diamond Class AW Turbine Oil is a premium quality, antiwear, rust and oxidation (R & O)-inhibited turbine oil developed to meet the demands of severe-service geared gas turbines and steam turbines.
Hydroclear Diamond Class AW Turbine Oil is available in two viscosity grades: ISO 32 and 46. It is formulated with high-quality, hydrocracked paraffinic base oils and select ashless additives to provide excellent wear protection, outstanding oxidation resistance, protection against rust and corrosion, and resistance to foaming. It has outstanding oxidation resistance and thermal stability at high temperatures to minimize sludge and varnish formation, and provide long service life. It protects system components against ...
(2) Conoco Hydroclear Diamond Class Heat Transfer Fluids are premium quality fluids specifically developed for use in liquid-phase heat transfer systems. They are available in two different formulations, "O/S" for use in open systems, and "C/S" for use in closed systems.
Hydroclear Diamond Class Heat Transfer Fluids O/S and C/S each are available in two viscosity grades: ISO 32 and 46. They are formulated with high-quality, hydrocracked paraffinic base oils and advanced additive chemistry to provide outstanding thermal stability and low sludge-forming tendency for long service life and outstanding overall performance.
Hydroclear Diamond Class Heat Transfer Fluids O/S 32 and O/S 46 are optimized for use in pressure-relieved, ...
(7) Conoco Hydroclear Diamond Class Turbine Oil is a premium quality, rust and oxidation (R & O)-inhibited turbine oil developed to meet the demands of severe-service gas turbines and steam turbines.
Hydroclear Diamond Class Turbine Oil is available in three viscosity grades: ISO 32, 46 and 68. It is formulated with high-quality, hydrocracked paraffinic base oils and select additives to provide outstanding oxidation resistance, protection against rust and corrosion, and resistance to foaming. It has outstanding oxidation resistance and thermal stability at high temperatures to minimize sludge and varnish formation, and provide long service life. It protects system components against rust and corrosion. It has excellent water-separating ...
(6) Conoco Hydroclear Quench Oils are high-quality oils developed for heat treatment of ferrous metals in a wide variety of quenching operations. They are formulated to provide deep and uniform hardening with minimum distortion and cracking for a smooth surface finish.
Hydroclear Quench Oils are available in four grades: 22, 22MS, 22HS and 32HS. The 22 grade is a highly refined, straight (non-additized) paraffinic mineral oil recommended for conventional quenching of ferrous metals at bath temperatures up to 150 ºF (66 ºC). It has a slower quench speed than the other grades, and provides minimum hardening power. The other three grades are fortified with select additives to provide enhanced oxidation resistance and metal-wetting ability ...
(7) Conoco Hydroclear TCS Slideway Lubricant is a demulsible, compounded oil developed for use on lathes and heavily loaded machine tool slideways. It is specially formulated to prevent stick-slip problems to ensure good surface finish on the machined part, and to provide quick and effective separation from water and metalworking fluids. It passes the Cincinnati Lamb Functional (Stick-Slip) Test for way oils.
Hydroclear TCS Slideway Lubricant is available in three viscosity grades: ISO 32, 68 and 220. It is formulated with high-quality, hydrocracked paraffinic base oils and a special extreme-pressure friction modifier that allows machine tool carriages to start easily and move smoothly throughout their travel, thus preventing stick-slip ...
Conoco Hydroclear Ultra-Clean Multipurpose R&O Oil is a premium quality, ashless, rust and oxidation (R&O)-inhibited mineral oil developed for the lubrication of industrial equipment requiring an ultra-clean, general-purpose circulating oil. It combines the same high-performance characteristics as our regular Multipurpose R&O Oil with the added advantage of fine filtration to a typical ISO Cleanliness Code of 17/15/11, for use in circulating systems with tight tolerances where particle contamination can cause operational problems.
Hydroclear Ultra-Clean Multipurpose R&O Oil is available in four viscosity grades: ISO 32, 46, 68 and 100. It is formulated with high-quality, hydrocracked base oils and an ashless, zinc-free antiwear ...
(4) Conoco Hydroclear Ultra-Clean Spindle Oil is a premium quality spindle oil developed for use in a wide variety of high-speed CNC milling machines that require an ultra-clean spindle oil.
Hydroclear Ultra-Clean Spindle Oil is available in four viscosity grades: ISO 2, 6, 10 and 22. It is formulated with high-quality, hydrocracked paraffinic base oils and select additives to provide outstanding wear protection, protection against rust and corrosion, and resistance to foaming. It has excellent oxidation resistance and thermal stability at high temperatures to minimize deposits and provide long service life. It has excellent water-separating properties to minimize the formation of emulsions, and is resistant to excessive foam buildup. ...
(10) Conoco Industrial Oil is a highly refined, non-compounded paraffinic mineral oil recommended for use as a high-quality process oil or blending component for other lubricants.
Industrial Oil is available in nine grades for use in a wide range of applications. It is highly refined from select paraffinic stocks to be uniform in quality and chemical composition and have carefully controlled physical and chemical properties. It has high natural oxidation stability, low volatility and good viscosity-temperature characteristics for use over a wide temperature range. It has a high flash point relative to its viscosity, good solvency properties and very light color.
(6) Conoco Megaflow AW Ultra-Clean Hydraulic Oil is a premium quality antiwear hydraulic oil developed for use in industrial and mobile hydraulic systems that operate at high pressures and require oil with a high level of fluid cleanliness. It provides the same performance benefits as Conoco Megaflow AW Hydraulic Oil with the added benefit of fine filtration to a typical ISO Cleanliness Code of 17/15/11, for use in hydraulic systems with tight tolerances where particle contamination can cause operational problems.
Megaflow AW Ultra-Clean Hydraulic Oil is available in five viscosity grades: ISO 22, 32, 46, 68 and 100. It is formulated with high-quality, hydrocracked paraffinic base oils, a zinc dithiophosphate antiwear additive, rust and ...
(26) Conoco Multipurpose R&O Oil is a rust and oxidation (R&O)-inhibited circulating oil developed for use in circulation systems, geared turbines, lightly loaded gearboxes and many other industrial applications.
Multipurpose R&O Oil is available in eight viscosity grades: IS0 32, 46, 68, 100, 150, 220, 320 and 460. It is formulated with high-quality paraffinic base oils and select additives to provide oxidation resistance, protection against rust and corrosion, and mild wear protection. It is inhibited to minimize sludge and varnish formation, resulting in long service life. It protects system components against rust and corrosion, and provides mild wear protection to help increase equipment life. It has excellent water-separating ...
(5) Conoco Multi-Way Machine Lubricant is a compounded oil developed for use on lathes and heavily loaded machine tool slideways. It is specially formulated to prevent stick-slip problems to ensure good surface finish on the machined part. It passes the Cincinnati Lamb Functional (Stick-Slip) Test for way oils.
Multi-Way Machine Lubricant is available in three viscosity grades: IS0 32, 68 and 200. It is formulated with high-quality paraffinic base oils and a special extreme-pressure friction modifier that allows machine tool carriages to start easily and move smoothly throughout their travel, thus preventing stick-slip problems. This reduces carriage chatter and ensures a smooth finish on the machined part. Mild extreme-pressure ...
Quintolubric® 822-450 is a premium quality, readily biodegrable, synthetic fire-resistant hydraulic fluid developed for use in hydraulic systems operating in areas subject to fire hazards, such as in underground mining operations, steel mills and foundries. It is approved by MSHA for use in underground mining equipment.
Quintolubric® 822-450 is available in one viscosity grade: ISO 100. It is formulated with synthetic polyol esters and select ashless additives to provide outstanding fire resistance and excellent lubrication and wear protection for hydraulic pumps and motors. It has outstanding oxidation resistance and thermal stability at high temperatures, plus excellent detergency, to protect against sludge and varnish formation, ...
(13) Conoco Rock Drill Oil is an adhesive, extreme-pressure lubricant specially developed for the lubrication of air-powered tools such as rock drills, jackhammers, pavement breakers and drifters. It also may be used for the lubrication of machine tool slideways.
Rock Drill Oil is available in seven viscosity grades, ISO 32 through ISO 320, to cover a wide range of applications and operating temperatures. It is formulated with high-quality paraffinic base oils and select additives tailored to provide maximum protection for pneumatic percussion tools. It has high load-carrying capacity to protect against wear and seizure of sliding metal surfaces under heavy or shock-load conditions. It has good adhesiveness to metal surfaces in the ...
(7) Conoco Rolling Oil is a high-quality, multipurpose rolling oil developed for rolling non-ferrous metals, such as aluminum, brass, copper and copper alloys. It also is recommended for use as a bearing lubricant, hydraulic oil and roll-coating oil in many mill applications.
Rolling Oil is available in seven viscosity grades: ISO 10, 15, 46, 68, 150, 320 and 460. It is formulated with high-quality paraffinic base oils and select additives to provide excellent oxidation resistance, wear protection, protection against rust and corrosion, and resistance to foaming. It has excellent water-separating properties to minimize the formation of emulsions. It is nonstaining to aluminum and yellow metals.
(2) Conoco Spindle Oil is a high-quality spindle oil developed for the lubrication of high-speed needle and spindle bearings found in industrial, agricultural and textile equipment.
Spindle Oil is available in one viscosity grade: ISO 15. It is formulated with high-quality paraffinic base oils, an oiliness agent and a foam inhibitor. It has excellent oxidation resistance and thermal stability at high temperatures to minimize deposits and provide long service life. It protects against rust and corrosion and provides good wear protection for long spindle life. It has excellent water-separating properties to minimize the formation of emulsions, and is resistant to excessive foam buildup. It is nonstaining for use in textile equipment.
Syncon AW Hydraulic Fluid is a premium quality, synthetic antiwear hydraulic fluid developed for use in a wide variety of industrial, mobile and marine hydraulic systems operating at high pressure and under extreme-temperature conditions. It is particularly recommended for use in applications where operating conditions may be unfavorable or too severe for conventional mineral oil-based hydraulic oils.
Syncon AW Hydraulic Fluid is available in two viscosity grades: ISO 22 and 32. It is formulated with synthetic polyalphaolefin (PAO) base oils, an effective antiwear additive and rust and oxidation inhibitors. It provides excellent wear protection for hydraulic pumps and motors, has outstanding oxidation resistance and thermal ...
(2) Syncon Barrier Oil is a premium quality, non-reactive, synthetic light process oil developed for use as a barrier oil in seal applications where the manufacturer calls for a light mineral seal oil. Typical applications include seal service in refineries, gas plants, steel mills, power plants and chemical plants.
Syncon Barrier Oil is available in one viscosity grade: ISO 5. It is manufactured with synthetic polyalphaolefin (PAO) base oils fortified with select additives to provide excellent oxidation inhibition and lubricity over a wide temperature range. It is free of impurities that can cause catalyst poisoning in process applications, and is compatible with most commonly used seal materials. Note: For information on ...
(6) Syncon FG Hydraulic Oil is a premium quality, synthetic, food-grade antiwear hydraulic oil developed for use in the hydraulic systems of machinery found in food processing and packaging plants as well as in beverage bottling plants, where incidental food contact may occur.
Syncon FG Hydraulic Oil is available in four viscosity grades: ISO 32, 46, 68 and 100. It is formulated with pure synthetic polyalphaolefin (PAO) base oils and an ashless, zinc-free additive package to provide long service life, excellent wear protection for hydraulic pumps and motors, and protection against rust, corrosion and foaming. It has outstanding oxidation resistance and thermal stability at high temperatures to help minimize deposit formation, and ...
(18) Syncon R&O Oil is a multipurpose synthetic circulating oil developed for use in a wide variety of industrial applications. It is available in nine viscosity grades: ISO 32, 46, 68, 100, 150, 220, 320, 460 and 680. The lighter viscosity grades (ISO 32, 46, 68 and 100) are recommended for use in rotary air compressors, circulating pumps, vacuum pumps and electric motor bearings operating under severe-service conditions. The heavier viscosity grades (ISO 150, 220, 320, 460 and 680) are recommended for use in gearboxes that do not require an extreme-pressure gear oil.
Syncon R&O Oil is formulated with synthetic polyalphaolefin (RAO) base oils and selected additives that provide enhanced oxidation resistance, antiwear properties, ...
(2) Syncon Refrigeration Oil is a premium quality synthetic lubricant developed for use in rotary screw compressors in refrigeration service compressing ammonia, methyl chloride or carbon dioxide.
Syncon Refrigeration Oil is available in one viscosity grade: ISO 68. It is formulated with synthetic polyalphaolefin (PAO) base oils and a carefully balanced additive package to provide long service life, excellent deposit control, protection against rust and corrosion, and resistance to foaming. It has outstanding oxidation resistance and thermal stability at high temperatures to help minimize deposit formation and provide extended service intervals compared to conventional mineral oil-based lubricants, which can result in less maintenance ...
(2) Syncon Turbine Oil is a premium quality synthetic lubricant developed for use in land-based gas turbines operating over a wide range of temperatures, where the manufacturer calls for a synthetic hydrocarbon or PAO-based turbine oil.
Syncon Turbine Oil is available in one viscosity grade: ISO 32. It is formulated with synthetic polyalphaolefin (PAO) base oils and carefully balanced additives that provide enhanced oxidation resistance, high load-carrying capacity, protection against rust and corrosion, and resistance to foaming. It has outstanding oxidation resistance and thermal stability at high temperatures to help minimize deposit formation and provide long service life. It has a high viscosity index and a very low pour point for ...
(4) Syndustrial FR Hydraulic Fluid is a premium quality, readily biodegradable, synthetic fire-resistant hydraulic fluid developed for use in hydraulic systems operating in areas subject to fire hazards, such as in steel mills, surface mines and foundries.
Syndustrial FR Hydraulic Fluid is available in two viscosity grades: ISO 46 and 68. It is formulated with synthetic polyol esters and select ashless additives to provide outstanding fire resistance and excellent lubrication and wear protection for hydraulic pumps and motors. It has outstanding oxidation resistance and thermal stability at high temperatures, plus excellent detergency, to protect against sludge and varnish formation, and also protects hydraulic system components against ...
Syndustrial Gas Compressor Oil is a premium quality, synthetic blend lubricant developed for use as a crankcase oil and for cylinder lubrication in reciprocating compressors in natural gas service. It is specially formulated to minimize the effects of gas dilution and oil absorption in this type of service.
Syndustrial Gas Compressor Oil is available in one viscosity grade: ISO 150. It is formulated with a carefully balanced blend of synthetic ester and hydrotreated paraffinic base oils and select additives to provide excellent service and protection over a wide temperature range. It has excellent oxidation resistance and thermal stability at high temperatures to help minimize deposit formation, and has a high viscosity index and ...
(4) Syndustrial PAG Compressor Oil is a premium quality synthetic lubricant developed for use in oil-flooded rotary screw, rotary vane and reciprocating compressors processing natural gas, carbon dioxide or other hydrocarbon gases. It is specially formulated to resist hydrocarbon dilution and oil absorption in this type of service.
Syndustrial PAG Compressor Oil is available in five viscosity grades: ISO 46, 68, 100, 150 and 220. It is formulated with synthetic polyalkylene glycol (PAG) base oils and carefully selected additives to provide long service life, excellent wear protection, resistance to washout and lubricant carryover, and protection against rust and corrosion. Special inhibitors help resist corrosion caused by hydrogen ...
(4) Syndustrial R&O Oil is a premium quality synthetic diester lubricant developed primarily for use in reciprocating and some rotary air compressors operating under severe-service conditions, and in moisture-free environments. It is particularly recommended for use in applications where operating conditions may be unfavorable or too severe for conventional mineral oil-based lubricants.
Syndustrial R&O Oil is available in four viscosity grades: ISO 32, 68, 100 and 150. It is formulated with synthetic diester base fluids and select additives to provide long service life, good wear protection, and protection against rust and corrosion. It has better oxidation resistance and thermal stability at high temperatures compared with conventional ...
Syndustrial Rotary Compressor Oil is a premium quality synthetic lubricant developed for use in oil-flooded rotary screw, rotary lobe and rotary vane air compressors. It is particularly recommended for use in applications where operating conditions are unfavorable or too severe for conventional mineral oil-based compressor oils.
Syndustrial Rotary Compressor Oil is available in two intermediate viscosity grades: ISO 32/46 and 46/68. It is formulated with a blend of synthetic polyalkylene glycol (PAG) and synthetic ester base oils and carefully selected additives. It has outstanding oxidation resistance and thermal stability at high temperatures to help minimize deposit formation and provide long service life. It has high film ...
Syndustrial Turbine Oil is a premium quality synthetic lubricant developed for the severe service requirements of aero-derivative stationary and marine gas turbines.
Syndustrial Turbine Oil is available in one intermediate viscosity grade: ISO 22/32. It is formulated with synthetic polyol ester (POE) base oils and select ashless additives to provide outstanding performance and protection in gas turbines. It has outstanding oxidation resistance and thermal stability at high temperatures to help minimize deposit formation and provide long service life. It has high load-carrying capacity and excellent affinity to metal surfaces to protect against wear. It has natural detergency for improved cleanliness, and protects against rust and ...
Synkool HD is a premium quality, water-soluble, synthetic coolant developed for medium- to heavy-duty turning, milling and grinding of ferrous metals, as well as grinding and light-duty machining of aluminum and copper alloys. It contains a biocide and mixes easily with soft or hard water to form a high-quality synthetic metalworking fluid that provides excellent cooling properties and lubricity for maximum tool life and high-quality surface finishes on the machined parts.
Synkool HD is formulated to provide an optimum balance of lubricity and detergency for high-quality finishes on machined parts and for overall machine cleanliness. It is ideal for use in machine sumps, as well as in once-through applications because it is highly ...
Synkool SS is a premium quality, water-soluble, semi-synthetic coolant developed for general-purpose turning, milling and grinding of steel and high-speed steel alloys. It offers the ease of maintenance found in synthetic coolants plus the economy found in conventional soluble oils.
Synkool SS mixes with soft or hard water to form a high-quality semi-synthetic metalworking fluid that provides excellent cooling properties and lubricity for maximum tool life and good surface finishes on the machined parts. It contains a biocide to combat the growth of harmful microorganisms in machine sumps and reservoirs.
Synkool SS is formulated to provide an optimum balance of lubricity and detergency for high-quality finishes on machined ...
(2) Conoco Transformer Oil is a highly refined electrical insulating oil developed for use in oil-immersed transformers, capacitors, tap changers and circuit breakers where the equipment manufacturer specifies a Type II inhibited oil.
Transformer Oil is available in one viscosity grade: ISO 10. It is formulated with hydrotreated naphthenic base oils and an oxidation inhibitor to minimize sludge and deposit formation and provide extended service life compared with non-inhibited transformer oils. It has a high dielectric strength and low power factor to provide excellent insulating properties. It has excellent low-temperature properties and is noncorrosive to copper and copper alloys. This product does not contain any PCBs.
Conoco Wet Gas Compressor Fluid is a high-quality lubricant developed for the lubrication of oil-flooded rotary compressors and for cylinder lubrication in reciprocating compressors in natural gas service. It is specially formulated to minimize the effects of gas dilution and oil absorption and to resist wash-off in compressors handling "wet" gas (natural gas containing liquid hydrocarbons and/or water).
Wet Gas Compressor Fluid is available in one viscosity grade: ISO 220. It is formulated with high-quality paraffinic base oils and select additives to provide excellent service and protection in gas compression service. It has excellent oxidation resistance and thermal stability at high temperatures to help minimize deposit ...
(5) White Oil is a highly refined, premium quality mineral oil developed for use in food processing plants, consumer products and in other applications that require an exceptionally pure white mineral oil. It meets or exceeds the highest industry standards for purity and stability. It is NSF H1 registered and meets former 1998 USDA H1 guidelines for incidental food contact.
White Oil is manufactured with a mixture of paraffinic and naphthenic hydrocarbons of the highest purity. It is available in five grades: 50/60 (ISO VG 7), 65/75 (ISO VG 10/15), 80/90 (ISO VG 15), 200/215 (ISO VG 32/46) and 340/365 (ISO VG 68). It contains Vitamin E as a natural oxidation inhibitor and remains colorless, odorless and tasteless during normal storage ...
